OWNERMAINTENANCE 6
17
MANUAL TRANSAXLE
LUBRICANT
G100A01O-EAT
ToChecktheTransaxleOilLevel
!
CAUTION:
Filler plug
The transaxle lubricant level
should only be checked when the
engine is cold to prelude the pos-
sibility of personal injury by con-
tact with hot components.
Drain plug
1.
To check the transaxle lubricant
level, the vehicle should be placed
on level ground and the level plug
removed with a suitable spanner.
HJM5009
G100B01L
The transaxle lubricant should be
checked and/or changed at intervals
specified in the maintenance sched-
ule.
Park the car on level ground with the
engine off.
2. If the level is correct, lubricant
should begin to drip from the plug
orifice. In this case the plug should
be replaced.
If the level is incorrect, lubricant
should be added until it begins to
drip from the plug orifice at which
time the plug should be replaced.
1.
Using a wrench of the correct size,
loosen the oil filler bolt turning it
counterclockwise and remove it with
your fingers.
Recommended Lubricant
Use only HYUNDAI GENUINE
PARTS MTF 75W/90 (API GL-4).
2.
Use your finger to feel inside the
hole. The oil level should be at its
bottom edge. If it is not, check for
leaks before adding oil. To refill the
transaxle or bring the oil level up,
add oil slowly until it reaches the
proper level. Do not overfill.
3.
Replace the bolt and washer, screw
it in with your fingers and then
tighten securely with the wrench.
jmuk-6.p65
17
5/31/04, 4:48 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)