IN CASE OF EMERGENCY3
11
SD070I1-E
7. Re-install Wheel Nuts
D060I01E-EAT
8. Lower Vehicle and Tighten
Nuts
Go around the wheel tightening every
other nut until they are all tight. Then
double-check each nut for tightness.
After changing wheels, have a techni-
cian tighten the wheel nuts to their
proper torque as soon as possible.
Wheel nut tightening torque:
Steel wheel & aluminium alloy wheel:
90-110 N.m (65-80 lb.ft)
D060H01JM
Fit the wheel nuts onto the studs and
tighten with the wheel nut wrench.
HJM4016
Lower the car to the ground by turning
the wheel nut wrench counterclock-
wise. Then position the wrench as
shown in the drawing and tighten the
wheel nuts. Be sure the socket is
seatedcompletelyoverthenut.Donot
stand on the wrench or use an exten-
sion pipe over the wrench handle.
jmuk-3.p65
11
5/31/04, 4:43 PM
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)