WHAT TO DO IN AN EMERGENCY
3
13
D060I02HP-GAT
9.
Go around the wheel tightening every
other nut until they are all tight. Then
double-check each nut for tightness.
D060J01A-AAT
AFTER CHANGING WHEELS
Lower Vehicle and Tighten
Nuts
HHP5019
HHP4029
If you have a tire gauge, remove the
valve cap and check the air pressure.
If the pressure is lower than recom-
mended, drive slowly to the nearest
service station and inflate to the cor-
rect pressure. If it is too high, adjust it
until it is correct. Always reinstall the
valve cap after checking or adjusting
tirepressure.Ifthecapisnotreplaced,
air may leak from the tire. If you lose a
valve cap, buy another and install it as
soon as possible.
HHP4030
Lower the car to the ground by moving
the jack handle up and down. Then
position the wrench as shown in the
drawingandtightenthewheelnuts.Be
sure the socket is seated completely
over the nut. Do not stand on the
wrench handle or use an extension
pipe over the wrench handle.
And reinstall the wheel cap by fitting
thebossofthewheelcapinthegroove
of the wheel, hitting the center of the
wheel cap with hand.
After changing wheels, have a techni-
cian tighten the wheel nuts to their
proper torque as soon as possible.
Wheel nut tightening torque:
Steel wheel & aluminium alloy wheel:
900-1,100 kg.cm (65-80 lb.ft)
After you have changed wheels, al-
wayssecuretheflattireinitsplaceand
return the jack, jack handle, and tools
to their proper storage locations.
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)