6 OWNER MAINTENANCE
CHECKING BRAKE PEDAL
CLEARANCE
CHECKING ENGINE DRIVE
BELTS
24
G180A01A-EAT
YG200A1-E
HPG190A1-E
ADJUSTING DRIVE BELTS
1.
With the engine turned off, check
the belts for cracks, fraying, or
excessive wear. Replace the belt if
it is in poor condition.
Petrol Engine
Power steering pulley
Idler pulley
2.
With your thumb (with a force
approx. 10 kg) press on each belt
midway between the pulleys. Each
belt should deflect no more than
the amount shown in figure.
2.95
in. (75 mm)
Tension pulley
Tension
pulley
Generator
pulley
G180A01L
COMP. pulley
You need a helper to check the brake
pedal clearance. With the engine run-
ning, have your helper press down on
the brake pedal several times and
then hold it down with a force of about
Tension pulley Crankshaft pulley
G190D01HP
Diesel Engine
Generator pulley Idler pulley Water pump pulley
Power
steering
pulley
490
N (50 Kg, 110 lbs). The brake
pedal clearance is the distance from
the top surface of the brake pedal to
the asphalt sheeting under the floor
mat.
If the brake pedal clearance is not
within the limits specified in the illus-
tration, have it inspected by your
Hyundai authorised repairer and ad-
justed or repaired if necessary.
COMP. pulley
Auto tensioner
Crankshaft pulley
Tension pulley
HHP5049
If a belt is loose, adjust it by:
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)