DRIVING YOUR HYUNDAI2
15
C350A01HP-EAT
Part-time 4WD operation
(Not all models)
4L(Low range 4-wheel drive)
2. Transfer shift knob operation
Use "4L" for climbing or descending
steep hills, off-road driving, and ve-
hicle towing.
Especiallywhenincreaseddrivepower
is required.
By turning the transfer shift knob(4H,
4L),bothaxlesofthevehiclearerigidly
connected with each other. This im-
proves the traction characteristics.
The 4WD LOW indicator light (
)
2H→ 4H
willbeturnedontoremindyouthatyou
are in the 4L mode.
Turn the transfer shift knob from the
2H mode to the 4H mode at speed
below 50mph (80 km/h). It is not nec-
essary to depress the clutch pedal
(Manual Transmission) or put the shift
lever into "N(neutral)" position (Auto-
!
CAUTION:
Do not select 4WD (4H or 4L) mode
on dry paved roads. Especially on
dry highway, never select the 4WD
mode.
HHP2113-E
matic Transmission). Perform this
operation when driving straight.
1.
Knob position
This is used to set different positions.
Four-wheel driving on dry paved
roadsforalongperiodwillincrease
the fuel consumption with possible
noise generation and early tyre
wear. In addition, axle gear oil tem-
perature increases with possible
driving system part wear.
4H→ 2H
2H(Rear-wheel drive)
Turn the transfer shift knob from the
4H mode to the 2H mode at speed
below 50mph (80 km/h). It is not nec-
essary to depress the clutch pedal
(Manual Transmission) or put the shift
lever into "N(neutral)" position (Auto-
matic Transmission). Perform this op-
eration when driving straight.
When driving on normal roads and
highway.
4H(High range 4-wheel drive)
When driving off-road, wet or snow-
covered roads with normal speed.
The 4WD HIGH indicator light (
)
willbeturnedontoremindyouthatyou
are in the 4H mode.
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)