2 DRIVING YOUR HYUNDAI
KEY POSITIONS
TO START THE ENGINE
4
C030A01HP-EAT
Cmbination Ignition Switch and
Steering Lock
SC050A1-E
!
WARNING: (Diesel only)
!
WARNING:
To ensure that sufficient vacuum
exists within the brake system dur-
ing cold weather start-up condi-
tions, it is necessary to run the
engine at idle after starting accord-
ing to the following table.
o If your Hyundai is equipped with a
manualtransmission,placethegear-
shiftleverinneutralanddepressthe
clutch pedal fully.
o If your Hyundai has an automatic
transmission, place the selector le-
ver in "P" (park).
Theenginemustneverbeturnedoff
and the key removed from the igni-
tionkeycylinderwhilstthevehicleis
inmotionsincethesteeringlockwill
operate and control of the vehicle
will be lost.
Ambient temp.
Warm up time
o Tostarttheengine,inserttheignition
key and turn it to the "START" posi-
tion. Release it as soon as the en-
ginestarts.Donotholdthekeyinthe
Above 5°F (-15°C) 3 min. or longer
Below 5°F (-15°C) 6 min. or longer
ACC
LOCK
ON
After starting the engine, do not
drive the vehicle until the brake
"START" position for more than 15
seconds.
vacuumwarninglight
off.
hasturned
NOTE:
Failure to carry out the above pro-
cedure may result in the need to
apply greater pedal pressure in or-
der to effect the necessary braking
effort.
For safety, the engine will not start
if the shift lever is not in "P" or "N"
position(AutomaticTransmission).
START
C040A01E
"START"
The engine is started in this position. It
will crank until you release the key.
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)