6
DO-IT-YOURSELF MAINTENANCE
CHECKING THE CLUTCH
FLUID
22
G120E02A-AAT
Adding Brake Fluid
G130A01A-AAT
To Check the Clutch Fluid
G130B02A-AAT
To Replace the Fluid
Recommended brake fluid conforming
to DOT 3 or DOT 4 specification should
be used. The reservoir cap must be
fully tightened to avoid contamination
from foreign matter or moisture.
!
WARNING:
Handle brake fluid carefully. It can
damage your vision if it gets into
your eyes. Use only DOT 3 or DOT
4
specification fluid from a sealed
NOTE:
container. Do not allow the fluid
can or reservoir to remain open
any longer than required. This will
prevent entry of dirt and moisture
which can damage the brake sys-
tem and cause improper opera-
tion.
Do not allow any other liquids to
contaminate the brake fluid. Seal
damage will result.
HHP5016
The clutch fluid level in the master
cylinder should be checked when
performing other under hood services.
The system should be checked for
leakage at the same time. Check to
make certain that the clutch fluid level
is always between the "MAX" and
"MIN" level markings on the fluid res-
ervoir. Fill as required. Fluid loss indi-
cates a leak in the clutch system
which should be inspected and re-
paired immediately. Consult your
Hyundai dealer.
!
WARNING:
Use caution when handling brake
fluid. It can damage your vision if
you get it in your eyes. It will also
damage your vehicle’s paint if
spilled on it and not removed im-
mediately.
To add brake fluid, first wipe away any
dirt, then unscrew the fluid reservoir
cap. Slowly pour the recommended
fluid into the reservoir. Do not overfill.
Carefully replace the cap on the reser-
voir and tighten.
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)