OWNERMAINTENANCE 6
33
HEADLIGHT AIMING AD-
JUSTMENT
G290A01HP-EAT
1. Keep all tyres inflated to the correct
pressure.
<Low Beam>
2.
Place the vehicle on level ground
and press the front bumper & rear
bumper down several times. Place
vehicle at a distance of 118.1 in.
Vertical
aiming
(3m)
from the test wall.
3.
Ensure that the vehicle is unloaded
(except for full levels of coolant,
engine oil and fuel, and spare tyre,
jack, and tools). Have the driver or
equivalent weight placed in driver's
seat.
Horizontal
aiming
G270A03O
G290B01HP
!
4. Clean the headlight lens and turn on
the headlight.
5. Open the bonnet.
6. Draw the vertical line (through the
centre of each headlight) and the
horizontal line (through the centre
of each headlight) on the aiming
screen.
(1) Horizontal line dimension from
ground :
Low Beam : 35.1 in.(894 mm)
High Beam : 33 in. (839 mm)
<
High Beam>
WARNING:
Horizontal
aiming
The halogen bulbs contain gas un-
der pressure and if impacted could
shatter, resulting in flying fragments.
Always wear eye protection when
servicing the bulb. Protect the bulb
against abrasions or scratches and
against liquids when lighted. Turn
the bulb on only when installed in a
headlight. Replace the headlight if
damaged or cracked. Keep the bulb
out of the reach of children and
dispose of the used bulb with care.
Vertical
aiming
G290B02HP
Before performing aiming adjustment,
make sure of the following.
(2)
Distance between each vertical
line :
Low Beam : 51.8 in. (1,316 mm)
High Beam : 42.4 in. (1,076 mm)
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)