6 OWNER MAINTENANCE
6
2
. Diesel Engine
SG030C2-E
Engine Oil Level
Prior to checking the level, the vehicle
should be allowed to stand for several
minutes after the engine has been
switched off to allow the oil to drain
back to the sump.
Withdraw the dipstick and wipe it with
a clean rag. Replace the dipstick fully
and withdraw again when the oil level
may be read from the dipstick. Normal
oil level is indicated when the oil is
present between the two marks on the
dipstick. It is not necessary to add oil
if the level is above the lower mark and
in any case, oil must not be added to
the degree that the level exceeds the
upper mark. Replace the dipstick fully
after checking the level.
(1)
Select engine oil of the proper SAE
viscosity number according to the
atmospheric temperature.
Recommended viscosity is given
in the following illustration.
Petrol Engine
G030C01HP
Diesel Engine
G030B01HP-2
NOTE:
!
WARNING:
SAE 0W-30 oil should be used only
in areas where extremely cold tem-
peratures of 50°F(10°C) or below are
experienced.
Be very careful not to touch the
radiator hose when checking the
engine oil as it may be hot enough
to burn you.
(
2) The engine oil quality should meet
the following classification:
HHP5002-E
The engine oil level should be checked
with the engine at normal operating
temperature and the vehicle parked
upon level ground.
API: CF-4 or ABOVE
ACEA: B4 or ABOVE
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)