6
DO-IT-YOURSELF MAINTENANCE
40
1.
2.
Keep all tires inflated to the correct
pressure.
And then, draw a parallel line at 38 mm
(1.50 in.) under the horizontal line in
case of adjusting the low beam or at
21 mm (0.83 in.) under the horizontal
line in case of adjusting the high beam.
G290B01HP-GAT
Adjustment After Headlight As-
sembly Replacement
Place the vehicle on level ground
and press the front bumper & rear
bumper down several times. Place
vehicle at a distance of 3m (118.1
in.) from the test wall.
See that the vehicle is unloaded
(except for full levels of coolant,
engine oil and fuel, and spare tire,
jack, and tools). Have the driver or
equivalent weight placed in driver's
seat.
Clean the headlight lens and turn
on the headlight.
Open the hood.
Draw the vertical line (through the
center of each headlight) and the
horizontal line (through the center
of each headlight) on the aiming
screen.
(Low Beam)
Vertical line
38 mm
Horizontal line
W
7. Adjust each cut-off line of the low
beam to the parallel line with a
phillips screwdriver - VERTICAL
AIMING.
8. Adjust each cut-off line of the low
beam to the each vertical line with
a phillips screwdriver - HORIZON-
TAL AIMING.
"P"
3.
H
Cut-off line
L
Ground
line
H
4.
G290B01HP-1
5.
6.
(High Beam)
Vertical line
Horizontal line
W
39 mm
"P"
21 mm
H
Cut-off line
L
(1)
Horizontal line dimension from
ground :
Ground
line
Low Beam : 894 mm (35.1 in.)
High Beam : 839 mm (33 in.)
Distance between each vertical
line :
H
(2)
G290B02HP
Low Beam : 1,316 mm (51.8 in.)
High Beam : 1,076 mm (42.4 in.)
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)