Safety and Security
Anti-theft systems
Arming the alarm system
Canceling the alarm
i If the turn signal lamps do not flash three
times, one of the following elements may not be
properly closed:
The alarm system indicator lamp is located
to the lower left of the hazard warning
flasher.
To cancel the alarm:
ț
ț
a door
With the SmartKey
the tailgate
̈
Insert the SmartKey in the starter
switch.
Close the respective element and lock the
vehicle again.
or
Disarming the alarm system
̈
Press the Œ or ‹ button on the
SmartKey.
̈
Unlock the vehicle with the SmartKey
or with KEYLESS-GO* (୴ page 40).
With KEYLESS-GO*
The turn signal lamps flash once to
indicate that the alarm system is
disarmed. Indicator lamp 1 goes out.
̈
Grasp an outside door handle.
1
Alarm system indicator lamp
The SmartKey with KEYLESS-GO must
be within 3 ft (1 m) of the vehicle.
i The alarm system will rearm automatically
again after approximately 40 seconds if neither a
door nor the tailgate is opened.
̈
Lock the vehicle with the SmartKey or
with KEYLESS-GO* (୴ page 71).
or
The turn signal lamps flash three times
to indicate that the vehicle is locked.
̈ Press the KEYLESS-GO start/stop
button (୴ page 43).
The alarm system is armed within ap-
proximately 10 seconds. Alarm system
indicator lamp 1 flashes.
The SmartKey with KEYLESS-GO must
be inside the vehicle.
112
Product Specification
Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz GL320 CDI, Mercedes-Benz GL450, Mercedes-Benz X164 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |