Controls in detail
Useful features
Step 7:
Step 9:
Step 12:
̈
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
̈ Press the “training” button on the ga-
rage door opener motor head unit.
̈ Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or 4).
The “training light” is activated.
Step 13:
You have 30 seconds to initiate the follow-
ing two steps.
Rolling code programming
̈ To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 10:
̈
Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
(
2, 3 or 4).
Step 11:
Press, hold for 2 seconds and release
Step 8:
̈
̈
Locate “training” button on the garage
door opener motor head unit.
same signal transmitter button a sec-
ond time to complete the training pro-
cess.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn” or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
Operator’s Manual.
i Some garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to
complete the training process.
If you live in Canada or if you are having
difficulties programming a gate operator
(regardless of where you live) by using the
programming procedures, replace step 4
with the following:
342
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL320 CDI, Mercedes-Benz GL450, Mercedes-Benz X164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)