Practical hints
Jump starting
̈
̈
Turn off all electrical consumers.
̈ Connect positive terminal 2 and 4
with the jumper cable. Clamp cable to
charged battery 4 first.
Warning!
G
Apply parking brake (୴ page 68).
Keep flames or sparks away from battery.
Do not smoke.
Observe all safety instructions and precau-
tions when handling automotive batteries
̈ Set automatic transmission to
position P (୴ page 194).
̈
Start engine of the vehicle with the
charged battery and run at idle speed.
̈
Open the hood (୴ page 379).
̈ Connect negative terminals 1 and 5
of the batteries with the second jumper
cable. Clamp the cable to negative
terminal 5 of the charged battery
first.
̈ Remove cover from negative
terminal 1.
(୴ page 530).
The jump-start contacts are located in the
engine compartment.
̈ Flip up cover 3 of positive terminal 2
in direction of arrow.
!
Never invert the terminal connections!
̈
Start the engine of the disabled vehi-
cle.
You can now turn on the electrical consum-
ers. Do not switch on the headlamps under
any circumstances.
̈
Remove the jumper cables first from
negative terminals 1 and 5 and then
from positive terminals 2 and 4.
1
2
3
Negative (-) terminal
Positive (+) terminal
Positive terminal cover
1 Negative terminal of discharged
battery
2 Positive terminal of discharged battery
You can now switch on the headlamps.
̈
Have the battery checked at the near-
est authorized Mercedes-Benz Light
Truck Center.
4
5
Positive terminal of charged battery
Negative terminal of charged battery
̈
Make sure the two vehicles do not
touch.
539
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL320 CDI, Mercedes-Benz GL450, Mercedes-Benz X164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)