Controls in detail
Control system
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display
Settings menu
In the Settings menu there are two
functions:
The function Reset to factory
settings?, with which you can reset all
the settings to the original factory
settings.
ț
when the SmartKey in the starter
switch is turned to position 0 or
removed from the starter switch.
ț
or
ț
A collection of submenus with which
you can make individual settings for
your vehicle.
ț
when you turn off the engine by
pressing the KEYLESS-GO* start/stop
button (୴ page 70) in the starter
switch once and open the driver’s door
(this puts the starter switch in
̈
Press button k or j.
The stored messages will now be
displayed in the order in which they
have occurred. For malfunctions and
warning messages, see “Vehicle status
messages in the multifunction display”
̈ Press button è or ÿ repeatedly
until the Settings menu appears in the
multifunction display.
position 0, same as with the SmartKey
removed from the starter switch)
(
୴ page 451).
i The vehicle status message memory will be
cleared when you turn the SmartKey in the start-
er switch to position 1 or 2, or when you press
the KEYLESS-GO* start/stop button once or
twice without depressing the brake pedal. You
will then only see high priority messages in the
multifunction display (୴ page 451).
i After you have scrolled through all recorded
status messages, the first recorded message
appears again.
170
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL320 CDI, Mercedes-Benz GL450, Mercedes-Benz X164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)