Controls in detail
3-zone automatic climate control*
Activating
Residual heat and ventilation
!
If the air conditioning cannot be turned on
again, this indicates that the air conditioning is
losing refrigerant. The compressor has turned
off.
̈
Adjust the temperature, air volume and
air distribution (୴ page 232).
With the engine switched off, it is possible
to continue to heat or ventilate the interior
for up to 30 minutes. This feature makes
use of the residual heat produced by the
engine.
̈
Press button; (୴ page 232).
Have the air conditioning checked at the nearest
authorized Mercedes-Benz Light Truck Center.
The indicator lamp on the button
comes on.
Using driver-side settings for all tem-
perature zones
i How long the system will provide heating
depends on
The driver-side settings are used for all
temperature zones.
ț
ț
the coolant temperature
the battery voltage
You can use the settings of the driver’s
side, such as temperature, air volume and
air distribution, for all temperature zones.
These settings only need to be made once
and the automatic climate control system
will automatically regulate the settings for
all temperature zones quickly and comfort-
ably.
Deactivating
̈
Press button; (୴ page 232) again.
Regardless of the temperature and air volume
set on the automatic climate control panel, an
interior temperature is aimed at by 72°F (22°C)
and the blower runs on low speed to protect the
vehicle battery.
The indicator lamp on the button goes
out.
i If you manually set the temperature, air vol-
ume or air distribution for the passenger side or
the rear passenger compartment when the
MONO setting is active, the MONO setting will
be switched off.
242
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL320 CDI, Mercedes-Benz GL450, Mercedes-Benz X164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)