Practical hints
Replacing bulbs
License plate lamp
Adjusting headlamp aim
Correct headlamp adjustment is extremely
important. To check and readjust a head-
lamp, follow the steps described:
̈
Park the vehicle on a level surface
25
feet (7.6 m) from a vertical test
screen or wall.
̈
Switch the headlamps on
(
୴ page 145).
If the beam does not show a beam pattern
as indicated in the figure left, then follow
the steps below:
1
2
License plate lamp cover
Screws
V Vertical centerline
H Headlamp mounting height, measured
from the center
̈
Open hood (୴ page 379).
̈
̈
̈
̈
̈
Loosen screws 2.
Remove license plate lamp cover 1.
Replace the tubular bulb.
i High beam adjustments simultaneously aim
the low beam.
Vehicle should have a normal tailgate load.
Reinstall license plate lamp cover 1.
Retighten screws 2.
518
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL320 CDI, Mercedes-Benz GL450, Mercedes-Benz X164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)