Controls in detail
Driving systems
Adjustment in 5 mph
(Canada: 10 km/h) increments
Setting to last stored speed
(“Resume” function)
Deactivating Distronic
There are several ways to deactivate the
Distronic system:
i The set speed value is decreased in 5 mph
(Canada: 10 km/h) increments each time you
press the cruise control lever down past the
resistance point.
Warning!
G
̈
Step on the brake pedal.
or
The set speed stored in memory should only
be set again if prevailing road conditions
permit. Possible acceleration or decelera-
tion differences arising from returning to the
preset speed could cause an accident
and/or serious injury to you and others.
̈
Briefly press the cruise control lever
down past the resistance point in direc-
tion of arrow 2 (୴ page 267).
̈ Briefly tip the cruise control lever in
direction of arrow 3 (୴ page 267).
Distronic will be deactivated. The last set
speed will be stored in memory.
̈
Release the cruise control lever.
The vehicle set speed decreases in
increments of 5 mph
(Canada: 10 km/h).
i The following message appears in the multi-
function display for approximately 5 seconds:
DISTRONIC Off.
̈
Briefly pull the cruise control lever in
direction of arrow 4 (୴ page 267).
The last stored set speed is deleted when the
engine is turned off.
i The new speed is set and the vehicle will
decelerate. Keep in mind that it may take a brief
moment until the vehicle has reached the set
speed.
The Distronic resumes to the last set
speed.
̈
Remove your foot from the accelerator
pedal.
The last set speed or, if no speed is stored,
the current set speed appears in the
multifunction display for approximately
5
seconds.
270
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL320 CDI, Mercedes-Benz GL450, Mercedes-Benz X164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)