Practical hints
Replacing bulbs
̈
Turn bulb socket 4 clockwise until it
Replacing bulbs for rear lamps
engages.
Before you start to replace a bulb for a rear
lamp, do the following first:
̈
̈
Plug in the electrical connector.
Insert front fog lamp 2 back into
bumper.
̈
Turn the exterior lamp switch to
position M (୴ page 145).
̈
̈
Fasten retaining screws 3.
Tail lamp unit
Reinsert cover 1 and press it in until it
engages.
i To access the bulb socket, you have to
remove the cover in the corresponding side trim
panel of the cargo compartment.
4
̈
Bulb socket of front fog lamp bulb
Turn bulb socket 4 counterclockwise.
Pull bulb socket 4 out of the housing.
Additional turn signal lamps bulbs
The additional turn signal lamps in the
exterior rear view mirrors have LEDs.
̈ Open the tailgate (୴ page 124).
̈
̈
Pull the front fog lamp bulb out of bulb
socket 4.
If a malfunction occurs or LEDs fail to func-
tion, the entire turn signal unit must be re-
placed. Have the turn signal unit replaced
by an authorized Mercedes-Benz Light
Truck Center.
̈
̈
Insert the new front fog lamp bulb into
bulb socket 4.
Insert bulb socket 4 into the housing.
515
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL320 CDI, Mercedes-Benz GL450, Mercedes-Benz X164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)