Practical hints
Replacing bulbs
Notes on bulb replacement
Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Light Truck Center:
Warning!
G
ț
ț
ț
ț
ț
Only use 12-volt bulbs of the same type
and with the specified watt rating.
Bulbs and bulb sockets can be very hot.
Allow the lamp to cool down before chang-
ing a bulb.
ț
the additional turn signal lamps in the
exterior rear view mirrors
Switch lights off before changing a bulb
to prevent short circuits.
ț
ț
ț
the high mounted brake lamp
the Bi-Xenon* low beam lamps
Keep bulbs out of reach of children.
Always use a clean lint-free cloth when
handling bulbs.
Halogen lamps contain pressurized gas.
A bulb can explode if you:
Your hands should be dry and free of oil
and grease.
the Bi-Xenon high beam flasher spot-
light*
ț
ț
ț
touch or move it when hot
drop the bulb
If the newly installed bulb does not
come on, visit an authorized
! Do not replace the LEDs yourself. You could
otherwise damage the LEDs or parts of the vehi-
cle. Only have the LEDs replaced by a an autho-
rized Mercedes-Benz Light Truck Center.
scratch the bulb
Mercedes-Benz Light Truck Center.
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.
i Replacing the bulbs for the front lamps is a
technically complex process. For your conve-
nience, we recommend that you have this work
carried out by an authorized Mercedes-Benz
Light Truck Center.
Have the headlamp adjustment checked
regularly.
510
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL320 CDI, Mercedes-Benz GL450, Mercedes-Benz X164 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)