X164_AKB; 4; 51, en-US
d2ureepe,
2009-03-23T09:27:13+01:00 - Seite 106
Version: 2.11.8.1
Power windows
106
X Express operation: Press or pull
switch: to? past the resistance point
and release.
X Closing: Pull switchA and release.
Both hinged quarter windows close
completely.
The corresponding window opens or closes
completely.
X Stopping during express operation:
Press or pull the respective switch again.
i When the obstruction sensor detects that
a hinged quarter windows is blocked during
the closing process, they will stop and open
slightly.
Closing when a door window is blocked
G Warning!
Make sure that nobody can become trapped
and be seriously or even fatally injured when
closing a door window with greater force or
without automatic reversal function.
X Halting closing process: Press or pull
switchA once more during the closing
process.
The hinged quarter windows will stop and
open completely.
i For your safety, the hinged quarter
windows cannot be opened again until
If the upward movement of a door window is
blocked during the closing procedure, the
door window will stop and open slightly.
4
seconds have passed.
X Immediately after the door window has
stopped because it was blocked, pull and
hold the respective switch upward until the
door window is fully closed.
Synchronizing door windows
The door windows must be synchronized after
the battery has been disconnected or if the
door windows cannot be fully closed (express
operation).
The door window closes with greater force.
If the door window is blocked again and opens
slightly:
Each door window must be synchronized
separately.
X Immediately after the door window was
blocked, pull and hold the respective
switch upward until the door window is fully
closed.
The door window closes without automatic
reversal function.
X Close all doors.
X Switch on the ignition.
X Pull and hold switch:,;,= or?
(
window is closed.
Y page 105) until the respective door
The door window opens again slightly.
X Pull and hold the respective switch once
more immediately until the door window is
closed completely.
X Hold the respective switch for
approximately 1 second.
G Warning!
Pulling and holding the switch to close the
door window immediately after it had been
blocked two times will cause the door window
to close without any reversal function for as
long as you hold the switch.
The door window is synchronized.
Hinged quarter windows
X Switch on the ignition.
X Opening: Press switchA and release.
Both hinged quarter windows open
completely.
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL350 BlueTEC, Mercedes-Benz GL450, Mercedes-Benz GL500, Mercedes-Benz GL550, Mercedes-Benz X164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2010 Mercedes-Benz GL350 BlueTEC GL450 GL500 GL550 X164 Owners Manual 4.3 out of 5.0 based on 3 product reviews.