X164_AKB; 4; 51, en-US
d2ureepe,
2009-03-23T09:27:13+01:00 - Seite 344
Version: 2.11.8.1
Flat tire
344
Do not tighten the wheel bolts when the
vehicle is raised. Otherwise the vehicle could
fall off the jack.
X Guide the spare wheel onto the alignment
bolt and push it on.
X Insert the wheel bolts and tighten them
slightly.
X Unscrew the alignment bolt.
X Install the last wheel bolt and tighten it
slightly.
Wheel bolt: must be used for 19", 20", and
21"
light alloy wheels. Wheel bolt; must be
used for the Minispare wheel. The wheel bolts
for the Minispare wheel are located in vehicle
tool kit.
Lowering the vehicle
!
Wheel bolts; must be used when
X Attach ratchet to vehicle jack so that the
word DOWN can be seen.
mounting the Minispare wheel. The use of
any wheel bolts other than wheel bolts;
for the Minispare wheel will damage the
vehicle’s brakes.
Lower the vehicle until the vehicle is resting
fully on its own weight:
G Warning!
X Turn ratchet in direction DOWN.
Make sure to use the original length wheel
bolts when remounting the original wheel
after it has been repaired.
X Remove the jack.
X Clean contact surfaces of wheel and wheel
hub.
!
To avoid paint damage, place wheel flat
against hub and hold it there while
installing first wheel bolt.
X Tighten the five wheel bolts evenly,
following the diagonal sequence illustrated
(
: toA), until all bolts are tight. Observe
a tightening torque of 110 lb-ft (150 Nm).
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL350 BlueTEC, Mercedes-Benz GL450, Mercedes-Benz GL500, Mercedes-Benz GL550, Mercedes-Benz X164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2010 Mercedes-Benz GL350 BlueTEC GL450 GL500 GL550 X164 Owners Manual 4.3 out of 5.0 based on 3 product reviews.