X164_AKB; 4; 51, en-US
d2ureepe,
2009-03-23T09:27:13+01:00 - Seite 287
Version: 2.11.8.1
Vehicle status messages in the multifunction display
287
X Removing: Open the tailgate (Y page 75). X Place the jack into the vehicle tool kit
X Lift the cargo compartment floor and
(Y page 285).
secure it on the upper cargo compartment X Close and pull tight the hook and loop
lip (Y page 284).
fastener (Y page 285) that secures the
jack.
!
To prevent damage, always disengage the
securing hook from upper cargo
compartment lip and lower the cargo
compartment floor before closing the
tailgate.
Vehicle status messages in the
multifunction display
Notes
X Remove the jack from the vehicle tool kit
(
Y page 285).
Warning and malfunction messages appear in
the multifunction display located in the
instrument cluster.
Certain warning and malfunction messages
are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in this
Operator’s Manual.
Selecting the Vehicle status message
memory menu in the control system
(
uncleared messages.
Y page 131) displays both cleared and
X Remove retaining screw: by turning it
counterclockwise.
High-priority messages appear in the
multifunction display in red color.
Certain messages of high priority cannot be
cleared from the multifunction display using
the reset button (Y page 124) or button
&
multifunction steering wheel.
i If retaining screw: does not come
loose, turn storage well casing= slightly
counterclockwise. Retaining screw:
should then come loose easily.
,*,U orV on the
X Remove storage well casing=.
X Remove spare wheel;.
For information on mounting the spare wheel,
Other messages of high priority and
messages of less immediate priority can be
cleared from the multifunction display using
the reset button or button&,*,
U orV on the multifunction steering
wheel. They are then stored in the Vehicle
status message memory menu
see “Flat tire” (Y page 336).
Storing the spare wheel after use
X Place spare wheel; into the spare wheel (Y page 131). Remember that clearing a
message will only make the message
well (Y page 287).
X Place storage well casing= into the spare disappear. Clearing a message will not
correct the condition that caused the
message to appear.
wheel (Y page 287).
X Secure spare wheel; by turning retaining
screw: clockwise (Y page 287).
Z
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL350 BlueTEC, Mercedes-Benz GL450, Mercedes-Benz GL500, Mercedes-Benz GL550, Mercedes-Benz X164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2010 Mercedes-Benz GL350 BlueTEC GL450 GL500 GL550 X164 Owners Manual 4.3 out of 5.0 based on 3 product reviews.