X164_AKB; 4; 51, en-US
d2ureepe,
2009-03-23T09:27:13+01:00 - Seite 231
Version: 2.11.8.1
Engine compartment
231
For more information on engine oil, see
“Fuels, coolants, lubricants etc.”
Y page 368).
Be careful not to spill any oil when adding.
Avoid environmental damage caused by oil
entering the ground or water.
(
For information on messages in the
multifunction display concerning engine oil,
see the “Practical hints” section
!
Excess oil must be siphoned or drained
off. It could cause damage to the engine
and emission control system not covered
by the Mercedes-Benz Limited Warranty.
(
Y page 308).
X Screw filler cap: back on filler neck.
Adding engine oil
Only use approved engine oils and oil
For more information on engine oil, see the
!
“Technical data” section (Y page 368) and
filters required for vehicles with
(
Y page 370).
Maintenance System. For a listing of
approved engine oils and oil filters, contact
an authorized Mercedes-Benz Center or
visit www.mbusa.com (USA only).
Transmission fluid level
The transmission fluid level does not need to
be checked. If you notice transmission fluid
loss or gearshifting malfunctions, have an
authorized Mercedes-Benz Center check the
transmission.
The following will result in engine or
emission control system damage not
covered by the Mercedes-Benz Limited
Warranty:
RUsing engine oils and oil filters of
specification other than those expressly
required for the Maintenance System.
Coolant level
RChanging of oil and oil filter at change
intervals longer than those called for by
the Maintenance System.
The engine coolant is a mixture of water and
anticorrosion/antifreeze.
When checking the coolant level, the vehicle
must be parked on level ground, and the
coolant temperature must be below 158‡
(70†).
RUsing any oil additives.
G Warning!
In order to avoid any potentially serious burns:
RUse extreme caution when opening the
hood if there are any signs of steam or
coolant leaking from the cooling system, or
if the coolant temperature display indicates
that the coolant is overheated.
RDo not remove the cap on the coolant
expansion tank if the coolant temperature
is above 158‡ (70†). Allow the engine to
cool down before removing the cap. The
coolant expansion tank contains hot fluid
and is under pressure.
Example illustration: GL 450 (GL 350 BlueTEC,
GL 550 similar)
X Unscrew filler cap: from filler neck.
X Add engine oil as required. Be careful not
to overfill with oil.
Z
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL350 BlueTEC, Mercedes-Benz GL450, Mercedes-Benz GL500, Mercedes-Benz GL550, Mercedes-Benz X164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2010 Mercedes-Benz GL350 BlueTEC GL450 GL500 GL550 X164 Owners Manual 4.3 out of 5.0 based on 3 product reviews.