X164_AKB; 4; 51, en-US
d2ureepe,
2009-03-23T09:27:13+01:00 - Seite 267
Version: 2.11.8.1
Driving instructions
267
!
Obstacles can damage the vehicle
underbody or suspension components. If
Driving on sand
G Warning!
possible use the assistance of a second
person outside the vehicle to scout the
path you intend to take and check for
adequate ground clearance when you cross
obstacles with your vehicle. The person
assisting you outside the vehicle should
always be a safe distance away from the
vehicle and positioned so that he or she
cannot get hurt in case of any unexpected
vehicle movement.
Do not reduce the tire inflation pressure
before driving through sand. However, if you
do so, remember to correct the tire inflation
pressure before continuing your trip. Driving
with reduced tire inflation pressure increases
the risk of losing control of the vehicle and
rolling over.
When driving on sand, observe the following
rules:
RSet the raised level (Y page 159).
After off-road driving or crossing obstacles,
inspect vehicle for any damage, especially
vehicle underbody and suspension
RAvoid high engine speeds.
components. Failure to do so can adversely RShift automatic transmission into a gear
affect the vehicle’s future performance,
range that is appropriate for the terrain.
including increased chance of an accident.
RIn sandy soil, drive at a steady speed as
conditions permit. This helps overcome the
vehicle rolling resistance and reduce the
likelihood of the vehicle sinking into the
ground.
When driving over tree stumps, big rocks and
other obstacles, observe the following rules:
RMake sure the off-road driving program
(
LOW RANGE mode (Y page 119) is
switched on.
Y page 158) or if equipped the
RDrive in tracks of other vehicles if they are
not too deep and you have sufficient
clearance.
RAvoid high engine speeds.
RShift automatic transmission into gear
range 1 (Y page 117).
Ruts
A number of off-road tracks or other byways
have deep ruts which can cause the
underbody to come in contact with the
ground.
RCheck the vehicle clearance before
crossing obstacles.
RCross obstacles (e.g. tree stumps or big
rocks) very slowly by aiming one of the front
wheels at the center of the obstacle, and
repeat same with the rear wheel.
RMake sure the off-road driving program
(
LOW RANGE mode (Y page 119) is
switched on.
Y page 158) or, if equipped, the
!
Special attention is needed when you
cross obstacles on a steep incline.
RSet the raised level (Y page 159).
The vehicle could slide sideways as a result
of its possible slanted position which in turn
may result in the vehicle tipping or rolling
over.
!
your vehicle’s clearance is sufficient.
Otherwise:
Check that the ruts are not too deep and
Ryour vehicle may be damaged
Rthe underbody of the vehicle may come
in contact with the ground and you may
get stuck
Z
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL350 BlueTEC, Mercedes-Benz GL450, Mercedes-Benz GL500, Mercedes-Benz GL550, Mercedes-Benz X164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2010 Mercedes-Benz GL350 BlueTEC GL450 GL500 GL550 X164 Owners Manual 4.3 out of 5.0 based on 3 product reviews.