X164_AKB; 4; 51, en-US
d2ureepe,
2009-03-23T09:27:13+01:00 - Seite 213
Version: 2.11.8.1
Useful features
213
Prerequisites for operation:
Tele Aid
In order to activate the Tele Aid system, a
RThe 12V power outlets in the second-row
footwell and cargo compartment
!
subscriber agreement must be completed.
To ensure your system is activated and
operational, please press Information
buttonE to perform the acquaintance
call. Failure to complete either of these
steps may result in a system that is not
activated.
If you have any questions regarding
activation, please call the Response Center
at 1-800-756-9018 (in the USA) or
(
Y page 211) are operational.
RThe plug of the small device must be
inserted fully into 115V AC socket:.
RThe on-board voltage of the vehicle is within
the permissible voltage range.
RThe specified wattage of the small device
is identical or lower than the maximum
permissible wattage (150 W) of the 115V
AC socket:.
1-888-923-8367
(in Canada).
X Operation: Open cover=.
Shortly after the completion of your Tele Aid
acquaintance call, you will receive a user ID
and password in the mail. You may use this
password to access the Tele Aid section in
“Owner’s Online” at www.mbusa.com (USA
only). The “My Tele Aid” section will give you
access to account information, remote door
unlock and more.
X Insert the plug of the small device into
115V
AC socket:.
LED; comes on.
If LED; does not come on, refer to the
section on possible nonoperation causes.
X Switching off: Pull the plug out of 115V AC
socket:.
The Tele Aid system is available if
Do not pull on the cable.
X Close cover=.
Possible nonoperation causes:
Rit has been activated and is operational.
Activation requires a subscription for
monitoring services, connection and
cellular air time.
RThe on-board voltage of the vehicle is not
within the permissible voltage range.
Rvehicle battery power is available.
X Start the engine.
Rthe relevant cellular phone network and
GPS signals are available and pass the
information on to the Response Center.
RThe temperature of the DC/AC inverter is
temporarily too high.
X Pull the plug of the small device out of
i Location of the vehicle on a map is only
possible if the vehicle is able to receive
signals from the GPS satellite network and
pass the information on to the Response
Center.
115V
AC socket: and plug it in again
after waiting a few minutes.
RSome small devices have a continuous
power rating of less than 150 W but a very
high switch-on current. Such devices will
not operate. When connecting such a
device, 115V AC socket: will not provide
power.
The Tele Aid system
(Telematic Alarm Identification on Demand)
If LED; still does not come on, contact an
authorized Mercedes-Benz Center.
Z
| Categories | Mercedes-Benz GL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz GL350 BlueTEC, Mercedes-Benz GL450, Mercedes-Benz GL500, Mercedes-Benz GL550, Mercedes-Benz X164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2010 Mercedes-Benz GL350 BlueTEC GL450 GL500 GL550 X164 Owners Manual 4.3 out of 5.0 based on 3 product reviews.