DO-IT-YOURSELF MAINTENANCE
G270A02A-GAT
HEADLIGHT BULB
5. Push the bulb spring for removing the head-
light bulb.
G290A01FC-GAT
HEADLIGHT AIMING ADJUSTMENT
Before performing aiming adjustment, make sure
of the following.
Replacement instructions:
6.
Remove the protective cap from the replace-
ment bulb and install the new bulb by match-
ing the plastic base with the headlight hole.
Install the dust cover after retightening the
bulb spring and reconnect the power cord.
1. Keep all tires inflated to the correct pres-
sure.
7
. Use the protective cap and carton to dis-
pose of the old bulb.
2. Place the vehicle on level ground and press
the front bumper and rear bumper down
several times. Place the vehicle at a dis-
tance of 3,000 mm (118 in.) from the test
wall.
8. Check for proper headlight aim.
WARNING
The halogen bulb contains gas under pres-
sure and if impacted could shatter, resulting
in flying fragments. Always wear eye pro-
tection when servicing the bulb. Protect the
bulb against abrasions or scratches and
against liquids when lighted. Turn on the
bulb only when installed in a headlight. Re-
place the headlight if damaged or cracked.
Keep the bulb out of the reach of children
and dispose of the used bulb with care.
3.
See that the vehicle is unloaded (except for
full levels of coolant, engine oil and fuel, and
spare tire, jack, and tools).
G270A01FC
4.
Clean the head lights lens and turn on the
headlight (low beam).
1. Allow the bulb to cool. Wear eye protection.
2.
3.
4.
Always grasp the bulb by its plastic base,
avoid touching the glass.
Disconnect the power cord from the bulb
base in the back of the headlight.
Remove the dust cover.
Vertical Aiming
HorizontalAiming
G290A01FC
G270A02FC
6-23
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)