2003 Hyundai Matrix Owners Manual

FEATURES OF YOUR HYUNDAI
H290B03E-GAT
3. TREBLE/FAD Knob
5. PRESET STATION Select Buttons
Six (6) stations  for AM, FM  and FM2 respec-
tively can be  preset in the  electronic memory
circuit.
1.
POWER ON-OFF Control Knob
TREBLE Control Knob
Press to pop  the knob out and turn  to the left
or right  for the  desired treble tone.
The  radio  unit  may  be  operated  when  the
ignition key  is in the  "ACC" or "ON"  position.
Press the button  to switch the power  on. The
display shows the radio frequency in the radio
mode,  the tape direction  indicator in the tape
mode or  CD track  in  either the  CD mode  or
CD  AUTO CHANGER  mode.  To  switch  the
power off,  press the  button again.
HOW TO PRESET STATIONS
FAD (Fader Control) Knob
Six AM  and twelve  FM stations  may be  pro-
grammed into the memory of  the radio. Then,
by  simply  pressing  the   band  select  button
and/or  one of  the  six station  select  buttons,
you may recall any of these  stations instantly.
To program  the stations,  follow these  steps:
Pull  the Bass  control  knob out  further.  Turn
the control  knob counterclockwise to  empha-
size front speaker sound. (Rear speaker sound
will be  attenuated) When  the control  knob is
turned clockwise,  rear speaker  sound will be
emphasized.  (Front  speaker   sound  will  be
attenuated)
VOLUME Control
Rotate  the  knob  clockwise  to  increase   the
volume and turn the knob counterclockwise to
reduce the  volume.
o
o
o
o
Press  band  selector  to set  the  band  for
AM, FM  or FM2.
Select the  desired station  to be stored  by
seek or  manual tuning.
4.
TUNE (Manual) Select Button
2.
BASS/BALANCE Control Knob
Press the (    ) side or (    ) side to  increase or
to decrease  the frequency.  Press either  but-
ton  and   hold  down  to   continuously  scroll,
Release  button  once  the  desired  station  is
reached.
BASS Control Knob
Determine the preset  station select button
you wish  to use  to access  that station.
Press  the  station  select  button for  more
than two seconds. A select button indicator
will  show  in the  display  indicating  which
select  button  you   have  depressed.  The
frequency  display  will   flash  after  it  has
been  stored  into  the  memory  with  beep
sound.  You should  then  release the  but-
ton, and  proceed to program  the next  de-
sired station. A  total of 18  stations can be
programmed by selecting one AM and  two
FM station  per button.
Press  to pop  the  knob out.  To  increase the
bass,  rotate   the  knob   clockwise,  while   to
decrease the  bass,  rotate the  knob counter-
clockwise.
SEEK  Operation (Automatic  Channel
Selection)
BALANCE Control knob
Press the  TUNE select  button for  0.5 sec  or
more.  Releasing it  will  automatically tune  to
the next  available station with  a beep sound.
When the (   ) side is pressed  longer than 0.5
second,  releasing  will  automatically  tune  to
Pull the Bass  control knob out further. Rotate
the knob clockwise to emphasize right speaker
sound.  (Left  speaker  sound  will  be  attenu-
ated) When  the control  knob is  turned coun-
terclockwise,  left speaker  sound will  be  em-
phasized (Right speaker sound will be attenu-
ated).
the next higher  frequency and when the (
)
side  is pressed  longer than  0.5  second and
releasing  will automatically  tune  to  the  next
lower frequency.
o
When completed,  any  preset station  may
be  recalled by  selecting AM,  FM  or FM2
band and  the appropriate  station button.
1-
78
Product Specification
Categories Hyundai Manuals, Hyundai Matrix Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 312 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Matrix
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field