2003 Hyundai Matrix Owners Manual

FEATURES OF YOUR HYUNDAI
H260B03E-AAT
3. BASS Control Knob
Press to pop  the knob out and turn  to the left
or right  for the  desired bass tone.
6. BAND Selector
Pressing the
FM1 and  FM2 bands.  The  mode selected  is
displayed on  LCD.
1.
POWER ON-OFF Control Knob
button changes  the AM,
FM/AM
The  radio  unit  may  be  operated  when  the
ignition key  is in the  "ACC" or "ON"  position.
Press the  knob to  switch the  power on.  The
LCD shows  the  radio frequency  in the  radio
mode or  the  CD track  indicator in  either the
CD mode or CD  AUTO CHANGER mode. To
switch the  power off,  press the knob  again.
TREB (Treble Control) Knob
Pull the bass control knob  further out. Turn to
the left  or right  for the desired  treble tone.
7. PRESET STATION SELECT Button
Six (6) stations for AM, FM or FM2 respective-
ly  can  be  preset  in  the  electronic  memory
circuit on  this unit.
4.
SCAN Button
When  the  scan  button  is  pressed,  the  fre-
quency will  increase  and the  receivable sta-
tions will be tuned in one after another, receiv-
ing each station for  5 seconds. To stop scan-
ning, press  the scan  button again.
VOLUME Control
HOW TO PRESET STATIONS
Rotate  the  knob  clockwise  to  increase   the
volume and turn the knob counterclockwise to
reduce the  volume.
Six AM  and twelve  FM stations  may be  pro-
grammed into the memory of  the radio. Then,
by  simply  pressing  the   band  select  button
and/or  one of  the  six station  select  buttons,
you may recall any of these  stations instantly.
To program  the stations,  follow these  steps:
BALANCE Control
5.
TUNE (Manual) Select Button
Pull  and  turn the  control  knob  clockwise  to
emphasize right speaker  sound (Left speaker
sound  will be  attenuated). When  the  control
knob is turned  counterclockwise, left speaker
sound  will  be   emphasized.  (Right  speaker
sound will  be attenuated)
Press the (    ) side or (    ) side to  increase or
to decrease  the frequency.  Press either  but-
ton  and   hold  down  to   continuously  scroll,
Release  button  once  the  desired  station  is
reached.
o
o
o
o
Press  band  selector  to set  the  band  for
AM, FM  or FM2.
Select the  desired station  to be stored  by
seek, scan  or manual  tuning.
Determine the preset  station select button
you wish  to use  to access  that station.
Press  the  station  select  button for  more
than two seconds. A select button indicator
will  show  in the  display  indicating  which
select  button  you   have  depressed.  The
frequency  display  will   flash  after  it  has
been stored  into the  memory.
SEEK  Operation (Automatic  Channel
2
. FAD (Fader Control) Knob
Selection)
Turn  the   control  knob  counterclockwise   to
emphasize front speaker sound. (Rear speaker
sound  will  be attenuated)  When  the  control
knob is turned clockwise,  rear speaker sound
will be emphasized. (Front speaker sound will
be attenuated)
Press the  TUNE select  button for  0.5 sec  or
more. Releasing will automatically tune  to the
next available  station with  a beep sound.
When the (   ) side is pressed  longer than 0.5
second,  releasing  will  automatically  tune  to
the next higher  frequency and when the (
)
side  is pressed  longer than  0.5  second and
releasing  will automatically  tune  to  the  next
lower frequency.
1-
71
Product Specification
Categories Hyundai Manuals, Hyundai Matrix Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 312 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Matrix
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field