CONTROLS AND EQUIPMENT
This could result of death, serious injury or
property damage. Both arms should not be
under or over the belt. Rather, one should be
over and the other under, as shown in the
illustration.
ZB090W2-A
SEAT BELTS (2-Point Static Type)
(Rear Seat Centre)
ZB090X2-A
Adjusting Your Seat Belt
To Fasten Your Seat Belt
Never wear the seat belt under the arm near-
est the door.
Too high
SB090R1-F
To Release the Seat Belt
Shorten
Correct
SSA1090T
With a 2-point static type seat belt, the length
must be adjusted manually so it fits snugly
around your body. Fasten the belt and pull on
the loose end to tighten. The belt should be
placed as low as possible on your hips, not on
your waist. If the belt is too high, it could
increase the possibility of your being injured in
an accident because you could slide under it.
SSD1090S
To fasten a 2-point static type seat belt, insert
the metal tab into the locking buckle. There
will be an audible "click" when the tab locks
into the buckle. Check to make sure the belt
is properly locked and that the belt is not
twisted.
SSD1090R
The seat belt is released by pressing the
release button in the locking buckle.
When it is released, the belt should automati-
cally draw back into the retractor.
If this does not happen, check the belt to be
sure it is not twisted, then try again.
1-
15
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)