CONTROLS AND EQUIPMENT
B020A01FC-EAT
B020B01FC-EAT
6SB035A1-FE
RUNNING IN (Gasoline Engine)
The longevity and performance of the vehicle
are greatly affected by the care exercised
during the first 1,000 miles of motoring. Be-
cause of modern manufacturing techniques,
rigid guidelines regarding maximum road
speeds have become unnecessary. However,
certain precautions should be observed in
order to obtain the best possible performance
and useful life from the vehicle.
RUNNING IN (Diesel Engine)
IMMOBILIZER SYSTEM
The immobilizer system is an anti-theft de-
vice, designed to prevent and deter automo-
bile theft.
The longevity and performance of the vehicle
are greatly affected by the care exercised
during the first 1,000 miles of motoring. Be-
cause of modern manufacturing techniques,
rigid guidelines regarding maximum road
speeds have become unnecessary. However,
certain precautions should be observed in
order to obtain the best possible performance
and useful life from the vehicle.
B880B03A-GAT
Keys
1)
2)
Do not race the engine without a load
(i.e revving the engine in neutral).
During the first 500 miles the maximum
engine speed should be restricted to 3,000
rpm and gradually increased thereafter.
Avoid prolonged constant speed operation.
The internal components of the engine will
become more quickly run in if the operation
speed is varied during the running in period.
Never allow the engine to labour. Use the
gearbox freely and avoid large throttle open-
ings when the engine speed is below 1,500
rpm.
1) Do not race the engine without a load
(i.e revving the engine in neutral).
2) During the first 600 miles the maximum
engine speed should be restricted to 3,000
rpm and gradually increased thereafter.
And while driving, keep under three quar-
ters of maximum vehicle speed.
3) Avoid prolonged constant speed operation.
The internal components of the engine will
become more quickly run in if the operation
speed is varied during the running in period.
4) Never allow the engine to labour. Use the
gearbox freely and avoid large throttle open-
ings when the engine speed is below 1,500
rpm.
3)
4)
AX10020A-1
All of the locks fitted to the vehicle are oper-
ated by the same key. However, since it is
possible to lock the doors without the use of
the key, care should be exercised to ensure
that the key does not become locked inside
the vehicle by mistake.
5)
6)
Avoid rapid acceleration and maximum
throttle openings.
Avoid harsh braking during the first 100
miles of urban motoring or 1,000 miles of
motorway driving to allow the friction fac-
ings of the brake pads and shoes to bed
against the discs and drums properly.
Avoid trailer towing during the running in
period.
5) Avoid rapid acceleration and maximum
throttle openings.
NOTE:
6) Avoid harsh braking during the first 100
miles of urban motoring or 1,000 miles of
motorway driving to allow the friction fac-
ings of the brake pads and shoes to bed
against the discs and drums properly.
If you make your own duplicate key, you
will not be able to cancel the system or
start the engine.
7)
1-
7)
Avoid trailer towing during the running in
period.
2
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)