OWNER MAINTENANCE
The clutch pedal freeplay should be checked
against the specified value. If the freeplay is not
correct, the clutch should be adjusted by a
Hyundai dealer.
SG190A1-E
G190B01TB-GAT
DRIVE BELTS (Gasoline Engine)
DRIVE BELTS (Diesel Engine)
Water Pump Pulley
0.2 ~ 0.24 in.
(5.1 ~ 6 mm)
Alternator
Auto tensioner
Pulley
SG170A1-E
BRAKE PEDAL FREEPLAY
Power
steering
pump
Generator Pulley
Crankshaft Pulley
A/C comp.
SSA6190A
G190B01FC
0.12
~ 0.31 in. (3 ~ 8 mm)
The various engine drive belts must be
checked for condition, tension and freedom
from damage and excessive wear. The ten-
sion of a new belt must be checked after thirty
minutes running following fitment of the new
belt to allow for the initial belt stretch.
At the scheduled maintenance inspection,
belts should be examined for cracks, wear,
fraying or other evidence of deterioration and
replaced if necessary.
Belt routing should also be checked to be sure
there is no interference between the belts and
other parts of the engine.
SSA6170A
The brake pedal freeplay should be checked
with the engine turned off. The pedal to floor
clearance should be checked with the engine
running and a load of 490 N applied to the
pedal. If either value is incorrect, the necessary
adjustment should be performed by a Hyundai
dealer. Pedal to floor clearance: 1.97 in. (50
mm)
6-16
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)