OWNER MAINTENANCE
NOTE:
1. Park the vehicle on level ground and en-
sure that the parking brake is firmly ap-
plied, and the engine allowed to cool.
DO NOT ATTEMPT THIS OPERATION
WHILST THE ENGINE IS HOT SINCE
BURNING OR SCALDING MAY RESULT.
2. Prepare a suitable receptacle to collect the
displaced coolant and position this under the
radiator drain tap.
Diesel engine
It is imperative that vehicles fitted with an
air conditioning system have a coolant
concentration of the recommended strength
at all times. The use of the air conditioning
system when the cooling system is filled
with water only will result in the heater
matrix freezing and subsequently bursting.
3.
4.
5.
6.
With the heater temperature control set to
the "HOT" position, remove the radiator cap
and open the radiator drain tap.
When the engine coolant has drained com-
pletely, close the drain tap ensuring that this
is not over tightened.
Prepare a suitable quantity of new engine
coolant (refer to section 9) and pour this
into the radiator.
Start the engine with the radiator cap still
removed and continue to add coolant as the
level decreases as air is expelled from the
system. When the level remains constant,
replace the radiator cap and replenish the
coolant reservoir.
SG050C1-E
Engine Coolant Level
G050C02FC
Gasoline engine
The
engine coolant level may be observed
through the side of the plastic coolant reservoir
(expansion tank) when the engine is cold. If the
level is below the "LOW" mark, add coolant of
the correct concentration until the level is be-
tween the "LOW" and "Full" marks. If the level
falls below the "LOW" mark on a regular basis
despite being topped up, consult a Hyundai
dealer.
SG050D1-E
G050C01FC
To Change the Engine Coolant
The engine coolant should be changed at
those intervals specified in the vehicle main-
tenance schedule in Section 5.
7.
When the engine is hot, check to ensure that
no coolant leaks are present.
WARNING:
The cooling fan is controlled by engine
coolant temperature and may sometimes
operate even when the engine is not run-
ning. Use extreme caution when working
near the blades of the cooling fan so that
NOTE:
Care should be taken to ensure that cool-
ant is not allowed to spill onto the
paintwork since the finish may become
damaged. If coolant spillage occurs, the
affected area should be rinsed thoroughly
with water.
6-8
Product Specification
Categories | Hyundai Manuals, Hyundai Matrix Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Matrix |
Document File Type | |
Copyright | Attribution Non-commercial |