CONTROLS AND EQUIPMENT
B170A04A-EAT
HEIGHT ADJUSTABLE FRONT SEAT
SHOULDER BELT (Not all models)
WARNING:
of movement whilst the belt is being worn.
However, in the event of rapid deceleration or
impact, the belt mechanism will automatically
lock.
The mechanism will also lock if the seat belt
webbing is withdrawn too quickly when the
belt is being fastened or if attempts are made
to withdraw the webbing whilst the vehicle is
not on level ground. Should the seat belt lock
under these conditions, it will be possible to
release the mechanism by allowing a small
amount of webbing to be retracted and the
belt withdrawn again.
o
The height adjuster must be in the locked
position when the vehicle is moving.
The misadjustment of height of the
shoulder belt could reduce the effec-
tiveness of the seat belt in a crash.
o
SB090P1-E
SEAT BELTS (3-Point Type)
To Fasten The Seat Belt
B170A01E-D
B200A01S-GAT
You can adjust the height of the shoulder belt
anchor to one of the 4 positions.
Adjusting Your Seat Belt
If the height of the adjusting seat belt is too
near your neck, you will not be getting the
most effective protection. The shoulder por-
tion should be adjusted so that it lies across
your chest and midway over your shoulder
nearest the door and not your neck.
SSD1090P
To adjust the height of the seat belt anchor,
lower or raise the height adjuster into an
appropriate position. To raise the height ad-
juster, pull it up. To lower it, push it down while
pressing the height adjuster button.
Release the button to lock the anchor into
position. Try sliding the release button to
make sure that it has locked into the position.
The seat belts are fastened by pulling the belt
buckle towards the seat belt stalk and insert-
ing the metal tongue of the buckle into the
stalk. The buckle should be firmly pressed
into the stalk until locked which will be indi-
cated by an audible "click".
The length of the seat belt webbing will be
automatically adjusted by the seat belt mech-
anism to allow the wearer maximum freedom
SSD1090Q
You should place the belt as low as possible
on your hips, not on your waist. If the belt is
located too high on your body, you could slide
under it in case of accident or a sudden stop.
1-
14
Product Specification
Categories | Hyundai Manuals, Hyundai Matrix Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Matrix |
Document File Type | |
Copyright | Attribution Non-commercial |