IN CASE OF EMERGENCY
SD070J1-E
SD070K1-E
SD080A1-E
8.
Lower Vehicle and Tighten Nuts
AFTER CHANGING WHEELS
VEHICLE TOWING OR RECOVERY
D080A01FC
o
OK FOR AUTOMATIC OR MANUAL
TRANSAXLE EQUIPPED VEHICLE
D060I01FC-D
D060B01FC
Lower the car to the ground turning the wheel
nut wrench counterclockwise. When the ve-
hicle is firmly on the ground, remove the jack
and tighten the wheel nuts securely. At the
first available opportunity, the wheel nut torque
should be checked with a suitable torque
wrench.
The pressure of the spare tyre should be
checked at the first available opportunity. If
any doubt exists as to the tyre pressure, the
vehicle should be driven slowly to the nearest
service station and the tyre pressure checked
and adjusted as required.
If the valve cap is lost from any of the valves,
a replacement should be obtained and fitted
at the first available opportunity. The valve
cap prevents the ingress of dirt which may
cause the valve to stick and therefore leak
and is part of the valve sealing function.
CAUTION:
An incorrect tow or recovery could result
in serious damage to the vehicle. If any
damage to the suspension, steering or
transaxle is apparent or suspected, a tow-
ing ambulance must be used.
Wheel nut tightening torque
Steel wheel & aluminium alloy wheel:
900-1,100 kg.cm (65-80 lb.ft)
Ensure that the spare wheel, jack and wheel
nut wrench as well tools are correctly located
in the boot of the vehicle to prevent damage
and noise.
3-7
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)