2003 Hyundai Matrix Owners Manual

FEATURES OF YOUR HYUNDAI
H210B02O-AAT
will be emphasized  (Front speaker sound will
be attenuated).
6. PRESET STATION SELECT Button
Six (6) stations for AM, FM1 and FM2 respec-
tively can be  preset in the  electronic memory
circuit on this unit.
1.
POWER ON-OFF/VOLUME Control
Knob
3.
BASS Control Knob
The  radio  unit  may  be  operated  when  the
ignition key  is in the  "ACC" or  "ON" position.
Rotate the knob clockwise  to switch the radio
unit on and to increase the volume.
The LCD shows the radio frequency in the radio
mode. Turn  the knob counterclockwise  to re-
duce the volume and to switch the radio unit off.
Press to pop the knob out and turn to the left or
right for the desired bass tone.
HOW TO PRESET STATIONS
Six AM  and twelve  FM stations  may be  pro-
grammed into the memory of  the radio. Then,
by simply pressing the band select button and/
or one of the six station select buttons, you may
recall any  of these stations  instantly. To  pro-
gram the stations, follow  these steps:
TREBLE Control Knob.
Further pull-lock  position of popped-up  knob.
Turn to  the left  or right for  the desired  treble
tone.
BAL (Balance Control) Knob
Pull  and  turn the  control  knob  clockwise  to
emphasize right speaker sound. (Left speaker
sound  will  be attenuated)  When  the  control
knob is  turned counterclockwise, left speaker
sound  will  be  emphasized.   (Right  speaker
soundwill be attenuated)
4. BAND Selector
Pressing the     FM   button changes the AM, FM1
o
o
o
o
Press band selector to set the band for AM,
FM1, and FM2.
Select the  desired station  to be stored  by
seek, scan or manual tuning.
Determine the preset  station select button
you wish to use to  access that station.
Press the station select button for more than
two seconds. A  select button indicator  will
show in the display indicating  which select
button  you  have  depressed.  You  should
then  release  the  button, and  proceed  to
program the next desired station. A total of
AM
and  FM2 bands.  The  mode  selected is  dis-
played on LCD.
5.
TUNE (Manual) Select Button
After  adjusting  the  balance,  push  the  knob
again to use the other function.
Press the (   ) side or (  ) side to increase or to
decrease the frequency.  With the button held
down for 1 sec. or more, the stop signal (broad-
casting  radio  wave) is  ignored  and  channel
selection continues.
SCAN Knob
When the scan knob is pressed, the frequency
will increase and the receivable stations will be
tuned  in  one  after  another,  receiving   each
station for 5 seconds. To stop scanning, press
the scan knob again.
SEEK  Operation (Automatic  Channel
18
stations can be programmed  by select-
Selection)
ing one AM and two FM stations per button.
When completed, any preset station may be
recalled by selecting AM, FM1 or FM2 band
and the appropriate station  button.
o
Press  the TUNE  select  button for  1  sec.  or
more. When the ( ) side is pressed, the unit will
automatically tune to the next higher frequency
and when the ( ) side is pressed, it will automa-
tically tune to the next  lower frequency.
2
. FAD (Fader Control) Knob
Turn the control knob counterclockwise to em-
phasize  front  speaker sound  (Rear  speaker
sound  will be  attenuated).  When the  control
knob is turned clockwise,  rear speaker sound
1-
65
Product Specification
Categories Hyundai Manuals, Hyundai Matrix Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 312 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Matrix
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field