CONTROLS AND EQUIPMENT
ZB090Y1-A
B230A03P-EAT
o
Since a safety belt or child restraint
system can become very hot if it is left
in a closed vehicle, be sure to check the
seat cover and buckles before placing a
child there.
When the child restraint system is not
in use, fasten it with a safety belt so that
it will not be thrown forward in the case
of a sudden stop or an accident.
Children who are too large to be in a
child restraint should still sit in the rear
seat and be restrained with the avail-
able lap/shoulder belts. Never allow
children to ride in the front passenger
seat.
Always make sure that the shoulder belt
portion of the outboard lap/shoulder belt
is positioned midway over the shoul-
der, never across the neck or behind
the back. Moving the child closer to the
center of the vehicle may help provide a
good shoulder belt fit. The lap belt por-
tion of the lap/shoulder belt or the cen-
ter seat lap belt must always be posi-
tioned as low as possible on the child's
hips and as snug as possible.
If the seat belt will not properly fit the
child, we recommend the use of an
approved booster seat in the rear seat
in order to raise the child's seating
height so that the seat belt will properly
fit the child.
To Release the Seat Belt
CHILD RESTRAINT SYSTEM
Children riding in the car should sit in the rear
seat and must always be properly restrained
to minimize the risk of injury in an accident,
sudden stop or sudden maneuver. According
to accident statistics, children are safer when
properly restrained in the rear seats than in
the front seat. Larger children should use one
of the seat belts provided.
You are required by law to use safety re-
straints for children. If small children ride in
your vehicle you must put them in a child
restraint system (safety seat).
Children could be injured or killed in a crash if
their restraints are not properly secured. For
small children and babies, a child seat or
infant seat must be used. Before buying a
particular child restraint system, make sure it
fits your car and seat belts, and fits your child.
Follow all the instructions provided by the
manufacturer when installing the child restraint
system.
o
o
B220C01FC
When you want to release the seat belt, press
the button in the locking buckle.
o
WARNING:
The centre lap belt latching mechanism is
different from those for the rear seat shoul-
der belts. When fastening the rear seat
shoulder belts or the centre lap belt, make
sure they are inserted into the correct
buckle to obtain maximum protection from
the seat belt system and assure proper
operation.
WARNING:
o
A child restraint system must be placed
in the rear seat. Never install a child or
infant seat on the front passenger's seat.
Should an accident occur and cause the
passenger side airbag to deploy, it
could severely injure or kill an infant or
child seated in an infant or child seat.
Thus, only use a child restraint in the
rear seat of your vehicle.
o
o
Never allow a child to stand up or kneel
on the seat.
1-
16
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)