DO-IT-YOURSELFMAINTENANCE
6
CHANGING THE OIL AND FILTER
9
o The engine oil consumption is
strongly effected by the viscosity
and quality of oil, engine rpm and
driving condition etc. The engine
oil is more consumed under severe
driving conditions such as high
speeds and frequent acceleration
and deceleration than normal driv-
ing condition.
G040A04FC-GAT
Gasoline engine
The procedure for changing the oil and
filter is as follows:
Oil filler
cap
1.6
DOHC
1. Park the vehicle on level ground
and set the parking brake. Start the
engine and let it warm up until the
needle on the coolant temperature
gauge moves above the lowest
mark. Turn the engine off and place
the gear selector lever in "P" (auto-
matic) or reverse gear (manual
transaxle).
Oil filter
Drain plug
2.
Open the hood and remove the
engine oil filler cap.
F040A02TB
Oil filler cap
3. Slide underneath the car and loosen
the oil pan drain plug by turning it
counterclockwise with a wrench of
the proper size. Be sure that a
drain pan is in position to catch the
oil as it drains out, then remove the
drain plug.
1.8
DOHC
!
Drain plug
Oil filter
WARNING:
G040A03E
Be very careful when draining the
engine oil as it may be hot enough
to burn you!
The engine oil and filter should be
changed at those intervals specified
in the maintenance schedule in Sec-
tion 5. If the vehicle is being driven in
severe conditions, more frequent oil
and filter changes are required.
Product Specification
Categories | Hyundai Manuals, Hyundai Matrix Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Matrix |
Document File Type | |
Copyright | Attribution Non-commercial |