DO-IT-YOURSELFMAINTENANCE
6
11
G040B04FC-GAT
Diesel Engine
Turn the engine off and place the
gear selector lever in "P" (auto-
matic) or reverse gear (manual
transaxle).
Open the hood and remove the
engine oil level dipstick.
4. Remove the engine oil filler cap.
5.
Slide underneath the car and
loosen the oil pan drain plug by
turning it counterclockwise oil pan
with a wrench of the proper size.
Be sure that a drain pan is in
position to catch the oil as it drains
out, then remove the drain plug.
Oil filler cap
2.
Upper cap
Oil filter
!
O-ring
WARNING:
Oil filter
element
Be very careful when draining the
engine oil as it may be hot enough
to burn you!
G040B01FC
Centerpipe
O-ring
The engine oil and filter should be
changed at those intervals specified
in the maintenance schedule in Sec-
tion 5. If the car is being driven in
severe conditions, more frequent oil
and filter changes are required.
Oil filter
housing
G040B02FC
6. When the oil has stopped draining,
replace the drain plug using a new
gasket and retighten by turning it
clockwise.
3.
Loosen the oil filter upper cap with
a proper tool from the oil filter
housing until an O-ring is seen.
Then, drain the oil completely.
Oil pan drain plug tightening
torque : 3.5 ~ 4.5 kgf.m
The procedure for changing the oil
and filter is as follows:
1.
Park the car on level ground and
set the parking brake. Start the
engine and let it warm up until the
needle on the coolant temperature
gauge moves above the lowest
mark.
7. Pull out the oil filter upper cap with
element from the oil filter housing.
Using a clean cloth, remove any
dirt or oil accumulated around the
oil filter housing.
!
Slowly loosen the oil filter upper
cap not to overflow the oil.
CAUTION:
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)