6
OWNER MAINTENANCE
CHECKING DRIVE BELTS
28
G180A01A-GAT
CHECKING BRAKE PEDAL
CLEARANCE
SG190A1-E
Petrol Engine
G190B01TB-GAT
Diesel Engine
Water Pump Pulley
Alternator
0.2~0.24 in.
(5.1~6 mm)
Auto tentioner fully
Power
steering
pump
45.1
(1.78
mm
in.)
Alternator
Pulley
A/C comp.
Crankshaft Pulley
HTB186
G190B01A
G180A01L
The various engine drive belts must be
checked for condition, tension and free-
dom from damage and excessive wear.
The tension of a new belt must be
checked after thirty minutes running
following fitment of the new belt to
allow for the initial belt stretch.
At the scheduled maintenance inspec-
tion, belts should be examined for
cracks, wear, fraying or other evi-
dence of deterioration and replaced if
necessary.
Belt routing should also be checked to
be sure there is no interference be-
tween the belts and other parts of the
engine.
You need a helper to check the brake
pedal clearance. With the engine run-
ning, have your helper press down on
the brake pedal several times and then
hold it down with a force of about 490N
(
50 kg, 110 lbs). The brake pedal
clearance is the distance from the top
surface of the brake pedal to the as-
phalt sheeting under the floor mat. If
the brake pedal clearance is not within
the limits specified in the illustration,
have it inspected by your Hyundai
dealer and adjusted or repaired if nec-
essary.
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)