OWNER MAINTENANCE
6
21
With the engine idling and the footbrake
applied, the transaxle selector should
be moved from the "P" position through
to the "L" position and back to the "N"
or "P" position.
Open the bonnet and remove the
transaxle dipstick, remembering that
care must be exercised to prevent
injury occurring through contact with
hot or rotating parts of the engine.
Fluid need only be added if the level is
at or below the lower mark and must
never be increased above the higher
mark. If additional fluid is required, this
should be poured into the transmission
through the dipstick tube with the aid
of a suitable funnel.
This means that the engine, radia-
tor, exhaust system etc., are very
hot so you should exercise great
care not to burn yourself during this
procedure.
SG110D2-E
Transaxle fluid level checking
!
CAUTION:
The automatic transaxle unit is a
precision engineered assembly and
correct operation is dependant upon
the exclusion of dirt and lint from
the unit. Therefore, it is imperative
that only lint free cloth (eg nylon) is
used for wiping the dipstick and
that the area around the dipstick is
thoroughly clean prior to level
checking or adding fluid.
HFC5008
C090A01FC-D
Wipe the dipstick, replace it fully and
promptly remove it again. The fluid
level should be between the upper and
lower marks.
The vehicle must be parked on level
ground with the parking brake firmly
applied and the engine at normal oper-
ating temperature. (Normal operating
temperature will only be achieved when
the vehicle has been driven for 6 miles
or more).
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)