OWNER MAINTENANCE
6
35
G290B02FC-EAT
Adjustment After Headlight As-
sembly Replacement
Specifications:
Vertical Aiming
Horizontal Aiming
"H"
Horizontal centre line of headlights
from ground.
: 26.5 in.(675 mm)
Vertical line
30mm
Horizontal line
W
(1.18
in.)
"P"
"W"
Distance between each headlight cen-
tre.
H
Cut-off line
L
:
46.3 in. (1,177 mm)
G290A01FC
Ground
line
5.
6.
Open the bonnet.
"L"
H
Draw the vertical line (through the
centre of each headlight beam pat-
tern) and the horizontal line (through
the centre of each headlight beam
pattern) on the aiming screen.
And then, draw the horizontal paral-
lel line at 1.18 in. (30 mm) under the
horizontal line.
Adjust each cut-off line of the low
beamtotheparallellinewithaphillips
screwdriver - VERTICAL AIMING
Adjust each cut-off line of the low
beam to each vertical line with a
phillips screwdriver - HORIZONTAL
AIMING.
Distance between the headlights and
the wall that the lights are tested
against.
G290B01L-D
If the vehicle has had front body repair
and the headlight assembly has been
replaced, the headlight aiming should
be checked using the aiming screen
as shown in the illustration. Turn on
the headlight switch. (Low Beam Posi-
tion)
: 118 in. (3,000 mm).
7.
8.
1.
Adjust headlights so that main axis
of light is parallel to the centre line
of the body and is aligned with point
"P" shown in the illustration.
Dotted lines in the illustration show
the centre of the headlights.
2.
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)