FEATURES OF YOUR HYUNDAI
1
49
B265C01LZ-AAT
B260H03A-AAT
othertime,youshouldslowthevehicle
andbringittoacompletestopinasafe
location off the roadway.
Electronic Stability
Program Indicator
Lights (If installed)
ParkingBrake/LowBrake
FluidLevelWarningLight
The brake warning light indicates that
the brake fluid level in the brake mas-
ter cylinder is low and hydraulic brake
fluid conforming to DOT 3 or DOT 4
specifications should be added. After
addingfluid,ifnoothertroubleisfound,
the car should be immediately and
carefullydriventoaHyundaidealerfor
inspection. If further trouble is experi-
enced,thevehicleshouldnotbedriven
at all but taken to a dealer by a
professional towing service.
Your Hyundai is equipped with dual-
diagonalbrakingsystems.Thismeans
you still have braking on two wheels
even if one of the dual systems should
fail. With only one of the dual systems
working,morethannormalpedaltravel
and greater pedal pressure are re-
quired to stop the car. Also, the car will
notstopinasshortadistancewithonly
half of the brake system working. If the
brakes fail while you are driving, shift
to a lower gear for additional engine
braking and stop the car as soon as it
is safe to do so.
!
Theelectronicstabilityprogramindica-
torschangeoperationaccordingtothe
ignitionswitchpositionandwhether the
system is in operation or not.
They will illuminate when the ignition
key is turned to the "ON" position, but
shouldgooutafterthreeseconds.Ifthe
ESP or ESP-OFF indicator stays on,
takeyourcartoyourauthorizedHyundai
dealer and have the system checked.
See section 2 for more information
about the ESP.
WARNING:
If you suspect brake trouble, have
your brakes checked by a Hyundai
dealer as soon as possible. Driving
yourcarwithaproblem ineitherthe
brake electrical system or brake
hydraulicsystemisdangerous,and
could result in a serious injury or
death.
Warning Light Operation
Theparkingbrake/lowbrakefluidlevel
warninglightshouldcomeonwhenthe
parking brake is applied and the igni-
tion switch is turned to "ON" or
"START". After the engine is started,
the light should go out when the park-
ing brake is released.
If the parking brake is not applied, the
warninglightshouldcomeonwhenthe
ignition switch is turned to "ON" or
"START",thengooutwhentheengine
starts. If the light comes on at any
B260C01A-AAT
O/D OFF Indicator Light
(If installed)
When the overdrive switch is turned
on, the overdrive off indicator will go
out. This amber indicator will be illumi-
nated when the overdrive switch is
turned off. (Auto T/A only)
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)