1CONTROLS AND EQUIPMENT
10
B070F01A-EAT
Keyless Entry System
(Not all models)
B070E02HP-GAT
Replacing the battery
!
CAUTION:
Whenthetransmitter'sbatterybecomes
weak, it may take several pushes on
the button to lock or unlock the doors,
and the LED will not light. Replace the
battery as soon as possible.
Only the transmitter can disarm the
armedstage. Ifthetransmitterdoes
not disarm the system, it is neces-
sary to take the following steps;
Locking doors
1. Close all doors.
2. Pushthe"LOCK"buttononthetrans-
mitter.
1
. Unlockthedoorwiththekey,which
will cause, the alarm to be acti-
vated.
Battery type : CR2032
3.
At the same time all doors lock, the
turn signal light will blink once to
indicate that the system is armed.
Replacementinstructions:
2.
Insert the key in the ignition key
cylinder and turn the ignition key
to "ON" position.
Unlocking doors
1.
2.
Push the "UNLOCK" button on the
transmitter.
At the same time all doors unlock,
the turn signal light will blink twice to
indicatethatthesystemisdisarmed.
3.
Wait for 30 seconds.
Aftercompletionofthestepsabove,
the system will be disarmed.
Screwdriver
MSO-0048-1
1.
Separatethecasewithabladescrew-
driver as shown in the illustration.
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)