6
DO-IT-YOURSELF MAINTENANCE
10
4
. When the oil has stopped draining,
replace the drain plug using a new
gasket and retighten by turning it
clockwise.
Be sure that the mounting surface
on the engine is clean and that the
old gasket is removed completely.
Lubricate the new gasket on the
filter with clean engine oil before
installation.
7. Remove the engine oil level dip-
stick.
. Refill the crankcase with the rec-
ommended engine oil. Refer to
the specification in chapter 9 for
engine oil capacity.
NOTE:
Always dispose of used engine oil
in an environmentally acceptable
manner. It is suggested that it be
placed in a sealed container and
taken to a service station for maybe
reclaimation. Do not pour the oil
on the ground or put it in with the
household trash.
Oil pan drain plug tightening
torque :
kgf.m
8
E.C
4.0 ~ 4.5
3.5 ~ 4.5
1.6
1.8
DOHC
DOHC
Except E.C
4.0 ~ 4.5
!
5
. Remove the oil filter by turning it
counterclockwise with a oil filter
wrench of the proper size. A cer-
tain amount of oil will come out
when you remove the filter. So be
sure to have your drain pan in
place underneath it.
WARNING:
!
Used motor oil may cause irrita-
tion or cancer of the skin if left in
contact with the skin for prolonged
periods of time. Wash your hands
thoroughly with soap and warm
water as soon as possible after
handling used oil.
CAUTION:
Slowly pour the recommended oil
into a funnel. Do not overfill not to
damage engine.
6
. Install a new oil filter in accordance
with the instructions on the carton
or on the filter itself. Do not over-
tighten.
9.
Start the engine and check to be
sure no oil is leaking from the
drain plug or oil filter.
10.Shut off the engine and recheck
the oil level.
Oil filter tightening torque:
1.2~1.6kgf.m
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)