Controls in detail
Power windows
Fully closing the power windows
(Express-close)
Synchronizing the power windows
!
If the upward movement of the door
window is blocked during the closing
procedure, the door window will stop
and open slightly. Remove the obstruc-
tion, press the respective door window
switch at the symbol j again past
the resistance point and release. If the
door window still does not close when
there is no obstruction, press and hold
the respective door window switch at
The windows must be synchronized each
time
̈
Press switch 1 to 2 at the
symbol j past the resistance point
and release.
ț
after the battery has been disconnect-
ed
The corresponding window closes com-
pletely.
ț
if the windows cannot be fully opened
(Express-open) or closed
(Express-close)
Warning!
G
Each window must be synchronized.
Driver’s door only:
the symbol j. The door window will
then close without the obstruction sen-
sor function.
̈
̈
̈
Close all doors.
If within 5 seconds you again press the
switch past the resistance point and re-
lease, the automatic reversal will not func-
tion.
Switch on the ignition (୴ page 34).
Press and hold switches 1 to 4 at
the symbol j until the windows are
completely closed.
Stopping power windows during
Express-operation
̈
Briefly press the respective window
switch again.
̈
Hold on to switches 1 to 4 for ap-
proximately 1 second.
The windows are synchronized.
199
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz CL65 AMG, Mercedes-Benz W215 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)