Practical hints
Towing the vehicle
Installing towing eye bolt
Removing cover
!
When towing the vehicle with all wheels
on the ground, please note the follow-
ing:
Press mark on cover in the direction of
arrow.
̈
̈
Lift cover off to reveal the threaded
hole for the towing eye bolt.
With the automatic central locking acti-
vated and the SmartKey in starter
switch position 2, or KEYLESS-GO*
start/stop button (୴ page 35) in
position 2, the vehicle doors lock if the
left front wheel as well as the right rear
wheel are turning at vehicle speeds of
approx. 9 mph (15 km/h) or more.
Installing towing eye bolt
̈
Take towing eye bolt and wheel wrench
out of trunk (୴ page 370).
̈ Screw towing eye bolt clockwise into
1 Cover on right side of front bumper
its stop and tighten with wheel wrench.
Switch off the tow-away alarm
Removing towing eye bolt
(
୴ page 87).
̈
Loosen towing eye bolt counterclock-
wise with wheel wrench.
To prevent the vehicle door locks from
locking, deactivate the automatic cen-
tral locking (୴ page 162).
̈ Unscrew towing eye bolt.
Towing of the vehicle should only be
done using the properly installed tow-
ing eye bolt. Never attach tow cable,
tow rope or tow rod to the vehicle chas-
sis, frame or suspension parts.
̈ Store towing eye bolt and wheel
wrench in trunk.
Installing cover
2
Cover on right side of rear bumper
̈
Fit cover and snap into place.
398
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz CL65 AMG, Mercedes-Benz W215 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)