Getting started
Driving
i
Wiping with windshield washer fluid
button (୴ page 35) and open
the driver’s door (with the driv-
er’s door open, starter switch is
in position 0, same as with
SmartKey removed from the
starter switch)
Intermittent wiping is interrupted when
the vehicle is at a standstill and a front
door is opened. This protects persons
getting into or out of the vehicle from
being sprayed.
Press the combination switch in the di-
rection of arrow 1 past the resistance
point.
̈
The windshield wiper operates with
washer fluid.
before attempting to remove any
blockage.
Intermittent wiping will be continued
when
i
To prevent smears on the windshield,
wipe with windshield washer fluid every
now and then even when it is raining.
ț
ț
Remove blockage.
ț
all doors are closed
Turn the windshield wipers on
again.
and
ț
the gear selector lever is in
position D or R
If windshield wipers fail to function at
all in the combination switch position I:
!
If anything blocks the windshield wip-
ers (leaves, snow, etc.), switch them off
immediately.
or
ț
ț
Set the combination switch to the
next higher wiper speed.
ț
the wiper setting is changed using
the combination switch
ț
For safety reasons, stop the vehicle
in a safe location,
Have the windshield wipers
checked at the nearest authorized
Mercedes-Benz Center.
Single wipe
ț
remove SmartKey from the
starter switch
̈
Press the combination switch briefly in
the direction of arrow 1 to the resis-
tance point.
For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system”
or
The windshield wipers wipe one time
without washer fluid.
turn off the engine by pressing
the KEYLESS-GO* start/stop
ț
(
୴ page 282).
55
Product Specification
Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz CL65 AMG, Mercedes-Benz W215 |
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |