Operation
Engine compartment
Checking the engine oil level with the
control system
̈ Press button k or j on the mul-
tifunction steering wheel until the fol-
lowing message is seen in the
multifunction display:
ț ADD 2.0 QTS. TO
REACH MAX. OIL LEVEL
When checking the oil level
(Canada: 2.0 LITERS)
ț
the vehicle must be parked on level
ground
i
If you want to interrupt the checking
ț
with the engine at operating tempera-
ture, the vehicle must have been sta-
tionary for at least 5 minutes with the
engine turned off
procedure, press the k or j but-
ton on the multifunction steering
wheel.
One of the following messages will sub-
sequently appear in the multifunction
display:
̈ If necessary, add engine oil.
ț
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
For adding engine oil (୴ page 278).
For more information on engine oil, see the
“Technical data” section (୴ page 418) and
ț ENGINE OIL LEVEL
OK
To check the engine oil level via the multi-
function display, do the following:
(
୴ page 420).
ț ADD 1.0 QT. TO
Switch on the ignition (୴ page 34).
REACH MAX. OIL LEVEL
̈
(Canada: 1.0 LITER)
The standard display (୴ page 142) should
appear in the multifunction display.
ț ADD 1.5 QTS. TO
REACH MAX. OIL LEVEL
(Canada: 1.5 LITERS)
275
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz CL65 AMG, Mercedes-Benz W215 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)