Practical hints
Replacing bulbs
High beam flasher bulb
Parking and standing lamp bulb
Replacing bulbs for rear lamps
̈
Press ends of housing cover 1 tab to- ̈ Press ends of housing cover 1 tab to-
Before you start to replace a bulb for a
front lamp, do the following first:
gether and remove cover.
gether and remove cover.
̈
̈
̈
Press connector 2 downward.
Remove connector 2 with the bulb.
̈ Pull out the bulb socket 3 with the
bulb.
̈
Turn the exterior lamp switch to M
(୴ page 52).
̈
Pull the bulb out of the bulb socket 3.
Insert the new bulb so that the base lo-
cates in the recess on the holder.
̈ Open the trunk (୴ page 101).
̈ Insert a new bulb in the socket 3.
̈ Reinstall the bulb socket 3.
̈
̈
From below, press connector 2 with
bulb upward onto the reflector.
̈
Align housing cover 1 and click into
Align housing cover 1 and click into
place.
place.
Front side marker lamp bulbs
Front turn signal bulb
Since replacing the side marker lamp bulbs
is a technically highly demanding process,
we recommend you have the side marker
lamp bulbs replaced by an authorized
Mercedes-Benz Center.
̈
̈
̈
̈
Turn bulb socket 4 counterclockwise
and pull out.
Gently push bulb into bulb socket 4,
turn counterclockwise and remove.
Insert new bulb in bulb socket 4, push
in and twist clockwise.
Reinsert bulb socket 4 in lamp and
twist clockwise.
382
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz CL65 AMG, Mercedes-Benz W215 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)