Practical hints
Flat tire
୴
୴̈ Guide the spare wheel onto the align-
ment bolt and push it on.
̈ Before storing the jack in the trunk, it
should be fully collapsed, with handle
folded in.
̈
̈
Insert wheel bolts and tighten them
slightly.
̈ Place the wheel bolt wrench, alignment
bolt and jack back in the vehicle tool kit
in the trunk and close the covering lid.
Unscrew the alignment bolt, install last
wheel bolt and tighten slightly.
Replacing jack support tube cover
Warning!
G
̈
Slide tongue of cover under the upper
edge of the tube opening.
1
- 5 Wheel bolts
Use only Genuine equipment
Mercedes-Benz wheel bolts. Other wheel
bolts may come loose.
̈ Applying even pressure, press cover
until it snaps into place. Be careful not
to damage the locking tabs or clamp
the plastic retaining strap.
̈
Tighten the five wheel bolts evenly, fol-
lowing the diagonal sequence illustrat-
ed (1 to 5), until all bolts are tight.
Observe a tightening torque of
Do not tighten the wheel bolts when the ve-
hicle is raised. Otherwise the vehicle could
fall off the jack.
110
lb-ft (150 Nm).
!
G
You can also store and secure the dam-
aged wheel in the spare wheel well in
the trunk.
Lowering the vehicle
Warning!
̈
Lower vehicle by turning crank coun-
terclockwise until vehicle is resting ful-
ly on its own weight.
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
Do not activate the tire inflation pres-
sure monitor until the depressurized
tire is no longer in the vehicle.
̈
Remove the jack.
110
lb-ft (150 Nm).
390
| Categories | Mercedes-Benz CL-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CL500, Mercedes-Benz CL55 AMG, Mercedes-Benz CL600, Mercedes-Benz CL65 AMG, Mercedes-Benz W215 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)